Nails You Need To Use In Shoemaking
In shoemaking there are different tools and materials to work with. In my 1 Year Shoemaking Program I teach how to make shoes with minimum set of shoemaking tools because you really don’t need to have all shoemaking tools to get started.
So one of the most needed materials that you need in your craft is nails.
You need nails in the process of lasting. You will attach the upper and lining to the insoles with nails during lasting process.
How does it work?
You will pull the edges of the upper and lining with shoemaking pincers in order to attach them to the insoles.
So to keep the pulled upper on the right place, you will need to hold it with nails. The nails will help you to spread well all folds.
It will stretch the upper much better, so it will lay tightly on the shoe last.
This is how it must be done.
After you will hold the upper with nails, you will place a cement (contact glue for leather)
to attach the upper and lining to the insoles.
After glue will dry, you will take nails off the shoe lasts.
This is how it works in 99% of a time.
But in different places of the shoe you will need to use different approaches of lasting.
There is a difference in lasting of front part and back part of the shoe.
All images were taken from my Ankle Boot course.
What is the difference?
In the front part of the shoe (until the instep) you will take off all nails as it was described above.
In the back part of the shoe,you will leave nails. They will stay in your shoe to hold the back part of the shoe.
So for that reason you will need to use two types of the nails:
nails for the front part
nails for the back part
In this shoe making tutorial I will show you what are those two types of nails you need to use in your shoemaking craft.
If you have questions about this post, comment below the post and share this tutorial to spread the love for shoemaking craft!
Let me know in the comments below, What you would like to learn Next!